The MP-L201 mk.II is a true masterpiece in every sense of the word
The Masterpiece Series has in fact been on our internal road map for some years, but was not supposed to be introduced until 2011. However as the number of requests from the market increased, we decided to bring development forward and launch this very special series early. We think it is somewhat fitting for a range of products that are ahead of their time!
The complexity of all the MP products has put our engineering team to the test, as the technology used in the Signature
Series needed to be pushed to the extreme, to satisfy our expectations for the new Masterpiece Series.
To reach this level, we had to re-qualify all parts from component level and up. Furthermore, many new custom made parts were developed, pushing our subcontractors technologies to the limit of “possible”. All true balanced discrete gainstages in the MP-L201 are based on shielded modules, which incorporates a very high level of integration. Each module is moulded with special damping material, which takes care of both mechanical resonances and stability in temperature. This gives optimal working conditions for the circuitry.
With the introduction of the mk.II version 1Q17, yet another level has been reached. Especially the powersupply has undergone a massive redesign, not only increasing the total number of regulation steps, but also increasing the performance of each regulator steps. This results in further silence and wider and deeper soundstage — to name a few. Modules has been improved in bandwidth and precission which gives further improvement on resolution and micro details.
INPUT: XLR analog RCA analog
Available: 3 (L+R) 2 (L+R)
Sensitivity select: 2/4/8 VRMS 2/4/8 VRMS
Impedance: 10KΩ 10KΩ
Slew rate: 1000V/ μs 1000V/ μs
OUTPUT: XLR analog RCA analog RCA Bypass
Available: 2 2 1
Impedance: 75 Ω 75 Ω
Frequency response: +800KHz +800KHz
Signal to noise ratio: >110dB >110dB
THD + noise: > 0,01% > 0,01%
Type: Relay controlled fixed resistor network
Gain: -91,5dB to +18dB
Standby: 0,7W (CPU on)
Idle Mode: 30W (PSU still on)
Operation: 88W (Fully operational)
DIMENSIONS PSU AMP
Hight: 135 mm 135 mm
Width: 435 mm 435 mm
Depth: 430 mm 430 mm
Weight: 35 Kg 21 Kg
Active Crossover: Further information available on request